How To Raise Crib Mattress Height? The Safe Way

As your little one grows, it becomes necessary to adjust their sleeping arrangements to ensure maximum comfort and safety. One common issue that parents encounter is the height of the crib mattress.

As your baby grows taller, you may need to raise the crib mattress to prevent them from climbing out or falling over the rails. Fortunately, it’s a straightforward process you can do yourself with the right tools and instructions. In this article, we’ll guide you through the steps on how to raise the crib mattress height and ensure your baby’s safety.

Can You Elevate A Crib Mattress?

 If a mattress is sagging and not comfortable, it is better to buy a new mattress than try to fix it. However, if you think a luxury memory foam mattress topper can work for your old mattress, feel free to try it.

How To Raise A Crib Mattress?

Crib Mattress Height Adjustment:

If you want to know how to raise a crib mattress, you’ve come to the right place. Raising your crib mattress will give your other crib bedding a lift. With that said, let’s talk about this topic in more detail. The steps below will help you with understanding the process and troubleshooting tips.

1. Why Do You Need To Raise The Crib Mattress Height?

Before we dive into the steps to raise the crib mattress height, let’s first understand why it’s essential. As your baby grows and becomes more active, it may try to climb out of the crib. This can be dangerous and lead to injuries. Raising the mattress height ensures that your baby is safe and secure in their crib.

2. Determine the Current Height of the Crib Mattress

The first step in raising the crib mattress height is to determine the current level of the mattress. Most cribs come with two or three-height settings, so you must know which one you use.

3. Check the Crib Manual

To avoid accidents, check the crib manual to see how to adjust the mattress height. Following the manufacturer’s instructions is essential to ensure the crib remains stable and safe.

4. Gather the Necessary Tools

You will need a few tools to raise the crib mattress height, including a screwdriver and pliers. Check the manual to determine what type of screwdriver is needed.

5. Remove the Mattress

Before adjusting the height of the crib mattress, remove it from the crib frame to ensure your safety and that of your baby. You can place the mattress in a safe area that won’t be damaged.

6. Locate the Mattress Support

The mattress support is the base on which the mattress rests. Depending on the crib design, the support may be attached to the crib frame with screws or metal hooks. Locate the mattress support and the fasteners that attach it to the frame.

7. Adjust the Mattress Support Height

Remove the fasteners holding the mattress support using your pliers or screwdriver. Once removed, you can adjust the support height and reattach it to the frame at the new height.

8. Reinstall the Mattress

Once you’ve adjusted the mattress support, it’s time to reinstall the mattress. Ensure it fits snugly and securely on the support and there are no gaps between the mattress and the crib frame.

9. Check for Stability

Before placing your baby back in the crib, ensure the mattress support is stable and secure. Ensure that no loose screws or wobbling parts could be dangerous for your baby.

10. Repeat as Necessary

If your baby continues to grow and needs a higher mattress, repeat the above steps until you reach the desired height.

How To Raise Crib Height?

If you’ve ever wanted to raise the height of your crib, we have good news for you! It’s relatively easy to do. Here’s how:

1. Place a board on top of the crib.
2. Position it where you want to raise the crib’s height and screw it into place with a screwdriver or drill.
3. Use a tape measure to measure from one end of the board to another, then draw an X in pencil on each side of that line, about two inches in from each side.
4. Cut along each side of that line with tin snips or scissors to create two pieces that are the same length on both sides (the cut should be even).
5. Put one piece inside the other so that they are flush against each other, then screw them together using screws from your hardware store’s selection box (or use screws if you don’t have those).

How To Raise Baby Crib Mattress Height?

Raise Crib Mattress Height:

Raising a baby crib mattress height is key to your child’s safety. The crib mattress should be at the same level as your baby’s head so they can sleep safely and comfortably.

Step 1: Put a mattress pad or pillow under the crib mattress. You can also use a baby crib upholstered in soft fabric. The latter option is more comfortable and safe for your child.

Step 2: Use a height gauge to measure the distance between the floor and the top of the mattress or crib. This measurement will indicate the height of your child’s crib mattress.

Step 3: Measure the height of your baby’s bed with a tape measure, then subtract half of that number from your final measurement to arrive at the desired height for your crib mattress. For example, if you want to raise an infant’s bed by 10 inches, measure 10 inches from the floor and subtract 5 inches from this result; this should give you a final measurement of 5 inches below where your baby sleeps at night, which means that their crib mattress can be raised five inches from its original position.

How To Elevate Head Of Crib Mattress?

First, remove the mattress from its box.

Next, unroll the mattress and place it on a flat surface. The goal here is to ensure that there are no wrinkles in the mattress so that it will be smooth when you put it on your crib.

Take a yardstick or ruler and measure from one corner of the crib to another on all four sides.

Measure each side at least twice as long as it is comprehensive to account for any minor imperfections in your crib’s corners.

If you want to ensure that your baby’s head doesn’t touch any part of the wood frame, you can use a piece of felt or fabric to cover those areas before adding them back into your project.

Safe To Put 2nd Mattress In Baby Crib To Raise The Height

 It’s safer to put a second mattress in the crib than to put a pillow between the mattress and crib. The problem with setting a pillow between the mattress and crib is that the baby can adjust their upper body to a less vertical position, and the head can obstruct the airway. 

The danger is that the airway can collapse, and the baby can die. The threat of the second mattress is that the baby may roll over on the top mattress, which creates a risk that the baby can get trapped and die. The best way to prevent crib death is to ensure that the crib is free of all pillows, stuffed animals, and double mattresses and that the baby is on its back, alone.

Find Out More Here: 

• How To Store Baby Swing
• Do I Need A Baby Swing? 8 Reasons

The Verdict

Raising the crib mattress height is a simple process that can significantly affect your baby’s comfort and safety. Following these steps, you can adjust the crib to suit your baby’s needs as they grow. Remember to check the crib manual and use the right tools to avoid accidents. With a little effort and attention, you can ensure your baby has a comfortable and safe sleeping environment.